Guide Shoes
-
Fixed Guide Shoes For Freight Elevators THY-GS-02
THY-GS-02 cast iron guide shoe is suitable for the car side of a 2 ton freight elevator, the rated speed is less than or equal to 1.0m/s, and the matching guide rail width is 10mm and 16mm. The guide shoe is composed of a guide shoe head, a guide shoe body, and a guide shoe seat.
-
Sliding Guide Shoes For Passenger Elevators THY-GS-028
THY-GS-028 is suitable for elevator guide rail with a width of 16mm. The guide shoe is composed of guide shoe head, guide shoe body, guide shoe seat, compression spring, oil cup holder and other components. For the one-way floating spring-type sliding guide shoe, it can play a buffering effect in the direction perpendicular to the end surface of the guide rail, but there is still a large gap between it and the working surface of the guide rail, which makes it to the working surface of the guide rail.
-
Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029
THY-GS-029 Mitsubishi sliding guide shoes are installed under the safety gear seat on the upper beam of the car and the bottom of the car. Generally, there are 4 each, which is a part to ensure the car runs up and down along the guide rail. Mainly used for elevators whose rated speed is below 1.75m/s. This guide shoe is mainly composed of shoe lining, shoe seat, oil cup holder, compression spring and rubber parts.
-
Sliding Guide Shoes Are Used For Medium and High Speed Passenger Elevators THY-GS-310F
The THY-GS-310F sliding high-speed guide shoe fixes the car on the guide rail so that the car can only move up and down. The upper part of the guide shoe is equipped with an oil cup to reduce the friction between the shoe lining and the guide rail.
-
Sliding Guide Shoes For Passenger Elevators THY-GS-310G
THY-GS-310G guide shoe is a guide device that can slide directly between the elevator guide rail and the car or counterweight. It can stabilize the car or counterweight on the guide rail so that it can only slide up and down to prevent the car or counterweight from being Skew or swing during operation.
-
Sliding Guide Shoes For Hollow Guide Rail THY-GS-847
THY-GS-847 counterweight guide shoe is a universal W-shaped hollow rail guide shoe, which ensures that the counterweight device runs vertically along the counterweight guide rail. Each set is equipped with four sets of counterweight guide shoes, which are respectively installed on the bottom and upper part of the counterweight beam.
-
Roller Guide Shoes For High Speed Elevators THY-GS-GL22
THY-GS-GL22 rolling guide shoe is also called roller guide shoe. Due to the use of rolling contact, hard rubber or inlaid rubber is installed on the outer circumference of the roller, and a damping spring is often installed between the guide wheel and the guide shoe frame, which can reduce the guide The frictional resistance between the shoe and the guide rail, save power, reduce vibration and noise, used in high-speed elevators 2m/s-5m/s.
-
Roller Guide Shoes For Home Elevator THY-GS-H29
THY-GS-H29 villa elevator roller guide shoe is composed of a fixed frame, nylon block and roller bracket; nylon block is connected with the fixed frame by fasteners; the roller bracket is connected with the fixed frame through an eccentric shaft; the roller bracket is set up There are two rollers, the two rollers are separately arranged on both sides of the eccentric shaft, and the wheel surfaces of the two rollers are opposite to the nylon block.
-
Sliding Guide Shoe For Sundries Elevator THY-GS-L10
The THY-GS-L10 guide shoe is an elevator counterweight guide shoe, which can also be used as a sundries elevator. There are 4 counterweight guide shoes, two upper and lower guide shoes, which are stuck on the track and play a role in fixing the counterweight frame.
